Trials and tales of a not-so-advanced gardener--both in the dirt and beyond.

Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Thursday, May 21, 2009

My "how to" on Building a Rain Barrel

Almost a year ago I purchased a 55 gallon drum via CraigsList. My intentions were to make a rain barrel and, finally, I've completed (well, almost -- you can see I need to do some more painting) this project.


I should have painted it before putting everything together. This was electric blue, so I found some spray paint, specifically designed to be used on plastic. This color is cocoa bean.

After all of the recent rains, this bad boy is full and ready to water.


Here are the steps we took to make this happen (which is a bit different than other instructions I've found):
  • Acquire large container. I'm told pop producers generally sell these for pretty cheap.
  • Remove old downspout and affix an adjustable downspout (I bought this one at Lowe's for about $8), so that the water will run directly to the input hole of the barrel.
  • Cut a hole in the top of the barrel (we used a hand saw for this, I'm sure a reciprocating saw would have make this simple)
  • Drill a hole near the bottom of one side (we used a 1" hole bit) -- this is where the water will come out, and one near the top of the opposite side -- this is where the overflow will leave
  • Cut a piece of window screen/wire mesh for the input hole on the top
  • Screwed the wire into the plastic to cover said hole
  • Installed super handy (and available at my local Ace Hardware, $10 each) contraptions that take the place of washers, silicone, etc. to make a tight seal for both the spigot at the bottom and the overflow valve
  • Attached 3/4" spigot and 3/4" bib (to attach a a drain hose)
  • Painted it (I suggest doing this at the beginning of your project)
  • Put it in place on 2 cinder blocks
  • Attached 5 foot hose to the overflow bib attachment
  • Collected water!
Remember to close (aka turn off) the spigot, or your rainwater will just run out of the barrel...

Or, if this sounds too complicated, you can always buy one. If you're in Indianapolis, I suggest buying one from Keep Indianapolis Beautiful. They will plant a tree for each barrel purchased.

Wednesday, May 6, 2009

Rain Gutter Gardens


What a cool idea -- especially for those who don't have a ton of space.

Attach nice looking rain gutters to the side of your house for a row of garden.

This idea came all the way from Alaska via the Juneau Empire.

Monday, March 30, 2009

My brand new vegetable garden bed

Thanks to Mr. Nolen's comment to my previous post about Vegetable Garden plans for 2009, I've come to learn of Square Foot Gardening.

Thus it has come to be in my backyard.


First I measured and dug out a 4X8 section. Then lined it with concrete pavers (I chose these because they will last longer than wood, but were cheaper than composite wood-like material).


"Mel's Mix" from Square Foot Gardening consists of 1/3 peat moss, 1/3 vermiculite and 1/3 various composts. I found all of these ingredients at a local garden center.

Then once it was well mixed, we hoisted it into the freshly dug bed. Four inches in the ground and four above.
One down, one to go.

Monday, March 23, 2009

How to Build a Compost Bin (and it's cheap, too!)

Aside from the compost tumbler, I need another location to "store" lawn, garden, and kitchen waste to make beautiful compost.

Enter: the compost bin.

I wanted something durable (the old homeowners left a compost area of deteriorating chicken wire and metal rods), but not too expensive.

Here's what I used for my compost bin:
  • 4 wooden pallets (thanks, Mom!)
  • 2 metal "L" brackets
  • 3 metal hinges
  • 1 gate hook
  • several screws
First I cleared the area. Then I put two pallets at 90 degree angle. I secured them with metal "L" brackets.



One bracket on top and one on bottom on each of the sides. Four in all.





It looked decent with just the 3 sides. But I wanted to have a hinged "gate" on the front.








So I added a pallet on the front and raised it a few inches to ensure that it would swing freely. The front pallet is attached with 3 hinges.







Here is a view from the side to see how high the front was raised. This is supported with a concrete paver on the ground.








And here is the final product, with lots and lots of fun yard things inside. The front latches to the side with a simple hook and eye closure. I can open it easily and use the pitch fork to stir things up a bit.




All together I spent less than $20 on all of the hardware. The pallets were free. It took me less than an hour (all together) to build.

*Note: it will save you some time and energy if you drill pilot holes in the pallets before drilling in the screws.

Tuesday, September 16, 2008

Fall projects: raised vegetable garden beds, edging, bulb planting

So there are a number of projects I'd like to complete before it gets too cold to be outside. I'm making an ambitious list--after all, this is my first fall in the house. This is a great time to do plenty of projects--it's cool outside and the rush of things to do in the summer is gone.

Fall Projects:
  • Plant bulbs -- I have tulips, daffodils, irises, crocuses, alliums, and a few others (that is all from the old house, which I dug up and brought with me). New bulbs include hyacinths, minnow daffodils, dwarf iris, more crocuses, and wood hyacinths.
  • New bed in the side yard -- at some point a previous homeowner thought it would be smart to put down a ton of pea gravel in the side yard. My goal is to dig out about 6" of a section of this, along the privacy fence, and put in some plants. It's under a big maple tree, so these plants have to like the shade. I'm thinking hostas, astilbe, bleeding heart, spring bulbs, wood hyacinths, etc.
  • Raised veggie beds -- I have one now...but the soil is trash, it runs east-west, it's too close the raspberries, and the wood is rotting. I think I want to create 2 beds that run north-south, with fresh soil, encased in the composite decking so that it will last longer and I don't have to worry about painting it and making sure bad things don't leach into the soil.
  • Clean up the raspberries--these things are running wild! There are black-eyed Susans, a peony, a rose bush, and lamb's ear through out and at the edge of the raspberries. In an ideal world, I'd put in a post at each end with wire between to get the brambles to grow up, instead of out.
  • Prune trees--this is a massive undertaking. Everything is so overgrown. My dad is coming to visit next weekend with the "machula" (aka the chainsaw) to work on this. I'm renting a chipper for this as I don't see how I would possibly burn everything that will come down. I anticipate easily gaining 6 extra feet on the back of my property once all of the shrubs are trimmed back.
  • Re-seed the lawn--honestly, it's more weeds than lawn and with the addition of more land near the back, we'll want to seed that, too!
  • Edge the flower beds--was gifted some black plastic bed edging and I purchased a bunch of limestone recently. None of my beds have a clean edge and this should be done.
  • Thin flowers--since I've not lived through a full season of the flowers here, I don't want to get too crazy since I don't want to pull out flowers. BUT...some things have got to go..or be moved at least.
Can I get this all done in time?? I'll keep you posted on the progress!

Monday, August 18, 2008

Do your part, you buffoon!

So I recently read a blog post asking people if they recycle, why they recycle and how they recycle.

Although I am a fairly new convert to the whole "green" movement and recycling and all of that know-your-carbon-footprint shenanigans, I am trying to do what I can and tell others to do it, too.

Here is a somewhat all-inclusive list of what I'm doing to --go green, go local, go whatever...

RECYCLE...okay people THIS IS NOT HARD (at least not in Indy).
Keep Indianapolis Beautiful (KIBI) has a fabulous webpage of where to take all of your recyclables including everything from bathtubs to old CDs (much more is recyclable than I ever thought, by the way). The easiest things to recycle are paper, plastics #1 and #2, glass and aluminum as most recycling locations take these and in some cities (Indy included) they will even do curbside pick-up.

Other items I physically take somewhere else to recycle:
  • plastic bags (I'm trying with the canvas and fabric reusable ones and I do really well remembering to take them with me to the grocery, but always forget when I got to Target, Lowe's, etc) -- Sprawlmart and Kroger accept these (Kroger will also take plastic packaging and dry cleaning plastic
  • cardboard --Republic Services has a location near 86th and Ditch that accepts cardboard. Almost everything comes in cardboard packaging--this can be recycled (or some can be put in the compost bin)
  • Plastics #3-#7 -- this one is new. I just found a place downtown that accepts #3-#7 called Indianapolis Recycled Fiber so I'll be hauling it a trunkful at a time (gotta conserve gas!)down there. Almost all food containers (yogurt, dips, fruit, butter) seem to come in #5 so I was seeing a lot of that end up in my trash can.

COMPOSTING! So you all know about the compost tumbler and the compost pile. And we already know (from the To Compost or not to Compost post) that all yard and food waste (that is veggie and fruit) go into the compost pile.

Oh, and the newest helper for the compost pile: the compost bucket from World Market.

A W.I.P. (work in progress): the RAIN BARREL. The goal of the rain barrel is to collect rain water and save it for the times when you need to water the lawn. You can use water collected in the rain barrel--it's not treated like the water from the hose and, best of all, it's free!

And, of course, growing your own food is keeping it local, organic and tasty.

I buy as much as I can from Thrift Stores (like Goodwill!) and garage sales. The plan is to re-use or re-purpose it for my house. Granted sometimes this takes some imagination and crafty skill, but it is amazing what you can find. (That will be a future post...)

So, that is a good introduction to doing your part. Oh, and ride a bike instead of driving when you can.

Tuesday, August 5, 2008

My ReadyMade Proposal

This is my proposal for the ReadyMade Garden Challenge of 2008!

I bit the bullet—I bought a house! I’ve been living in my new abode now for just over two months and I’m ready to embark on my first big project in the garden (while being thrifty, eco-friendly, and pocket-book conscious).














The project centers on a fire pit and incorporates aspects that will encourage birds and pollinators to stop by and enjoy. I have a movable fire pit now---which has created many burn spots in my yard (oops). So I will create a “perma-pit” either with the one I already have or by building one into the ground.






My plan includes reusing items I already have (such as pots and trellises) and items I hope to find for free or next to free (like the pile of bricks left here by the previous owners or the free wood chips that a local tree service will deliver).


I will have to buy some items such as a bird bath or fountain. A bird house will have to be made or purchased. And flowers must be purchased.

As you can see, there are some plants that already exist nearby, including some tall grass, Daylilies, Black-eyed Susan, and Evening Primrose. These will be thinned and additional native perennials that attract birds, bees and butterflies will be added. Ideally, I’ll incorporate flowers such as columbine, butterfly weed, false sunflower, purple coneflower, and other flowering perennials recommended by the
Indiana native Plant and Wildflower Society (of course depends on what the local nursery has in stock).

Finally, not directly in the space, but just beyond it, I’ll be building a rain barrel that will catch rainwater from the down spout and allow me to water my new garden with free water. The barrel I already have for this project is a very industrial, bright blue. As is, this would stick out like a sore thumb in my yard. Therefore, I will repurpose some old wood, rope and scrap metal to cover the outrageous blue.

There is a huge amount to accomplish in one month; but, with the right tools, some really good friends to help, and some luck, I’ll have a fabulous haven for s’more making and bird bathing.

Wednesday, July 30, 2008

DIY: No-sew new-to-me chair (for the garden room, of course!)

Here is the before pic--a hideous, I'm thinking 70's chair with lime green velvet and a funk that made the birds fly away. I think this is the one that had a mouse living in it at some point.

Why do I own it? Because I saw fabulous "bones" and a fabulous price ($7.99 at Goodwill). It shall be re-claimed for my garden room, where I am attempting to bring the outside in.

PROJECT TIME!

Tools and materials you'll need:

  • needle nose pliers
  • something with a flat edge for removing staples (I use a flat head screw driver)
  • gloves (these things are just dirty)
  • hand sander
  • spray paint
  • 2 yards of fabric (the pretty kind)
  • 2 feet of muslin or plain fabric
  • 2 feet of quilt batting
  • 2" foam (for the cushion)
  • staple gun (and staples)
  • clear glue (I used Welder in the red tube) -- NOT hot glue
  • embellishments, cording, etc

Steps:

1. Strip off all of the fabric, staples, glue, foam, padding, etc. This is what mine looked like when I was all done.


2. Take your pick--strip, sand and stain OR sand and paint. I chose the later because I wanted a lighter finish than the wood. Plus, I wouldn't know how to care for the caning properly to stain. I used 1.5 cans of spray paint on this one chair to get good and even coverage.


This stuff was the easy part. I'd done all of these things before. Now I was embarking to new territory--re-upholstery!





3. Making the seat.

First I put a layer of muslin over the squiggly metal pieces and trimmed my 2" foam to fit into the seat. Next I covered the foam with a layer of batting and now it was time for my fabric (sorry I didn't take pictures of these steps!)

Staple the fabric in the middle of the front of the chair, pull firmly and staple the opposite side in the middle. Make sure you have a couple of inches overhang. Work slowly to the sides. On this chair I was lucky enough to have a indentation where I put the staples. The most frustrating part of this entire project was making sure the fabric lies flat and still looks nice. On the corners I made a fold so the fabric didn't bunch.

I then took an Exacto knife and cut off the excess fabric. I finished it with some golden braid, which fit perfectly into the indentation. I used the clear glue to adhere it to the chair.


As for the top I re-used the cardboard insert and the brads from the old chair. I re-covered the brads using a different fabric and I adhered this using Aileen's craft glue. I then took fabric and covered the cardboard insert (again with the clear glue)

Once it was re-covered, I attached it to the chair using the Welder glue.

Voila! The finished product! A vast improvement for the eyes and for the nose.

Monday, July 14, 2008

Craft time: Scarf canopy!


So this project is from the summer when I broke my foot (broken foot occurred during the epic weekend in Nashville, when Noah and I visited my friend Laura).


Nevertheless, it's a fabulous craft DIY project.





What you need:
Assortment of scarves (mine was a patchwork so I wasn't too particular)
Hot glue gun and glue sticks
Scissors
Fishing wire
Needle (with an eye large enough for the fishing wire)


Steps to make this fabulous creation:

1) Arrange the scarves how you'd like for them to fit together. I tried to make it so I would cut as little as possible. I also hung mine over a twin bed, so make sure it's wide and long enough.

2) Cut the pieces so that they fit together with about 1/2 inch over lap.

3) Hot glue gun time! Go slowly; complete an end before adding any length.

4) Once all of the pieces are assembled, determine where you would like your "hanging points." Again, mine was over a bed, so I put the canopy on the bed (like a blanket) and found the corners. Stitch a piece of the fishing wire through the canopy (it's best if it can go through the seam where 2 scarves meet).

5) Tie a knot in the fishing wire and hang. I used small plastic hangers from 3m (the ones with the sticky piece that can easily be removed). The canopy will look like it is hovering over the bed, since the fishing wire is clear.






This is my finished project--some are more transparent than others, some are patterned and others are solid.

Monday, June 16, 2008

Making a Compost Tumbler -- I'll tumble for ya!

I can take absolutely no credit for the creation of this idea, only for making a post of step-by-step instructions. Anthony at The Compost Bin has a couple of posts about it and that's where I read about the Compost Tumbler; but, I wanted to post about how I did it.

So, I made a compost tumbler for less than $20--instead of paying $200 for a fancy one.
What you need:
A plastic garbage can with a lid
2 bungee cords
a drill
about a foot of screen typically used for windows
hot glue gun and glue
a hole-making drill bit



This is the one I used--2.5".
It was less than $10.





Step One: Cut a hole in that box! (People who get that SNL reference are LOLing now...)


So I drilled several holes in garbage can. These are necesary for aeration. (Optional: Take a utility knife and "clean-up" the edges of the circles.) These don't have to be circles, I just thought this was the easiest since they have a circle-making drill bit.



Step Two: Cut the screen in large enough pieces to cover the holes.
I just used a pair of my rusty garden shears and made the square large enough to overlap about 1/2 an inch.
*If you have a great hardware guy like my Vince at Ace, see if they will sell you just a foot from the screen they use to repair window screens. I got mine for about $1.25--much less than the $10 I would have paid for several feet of screen in the roll (that I will never use.)
Step Three: Cover the holes.

I used my hot glue gun with normal glue. I found the best way was to place the screen on the hole on the inside, then to glue around the circle.






Step Four: Put in your favorite goodies that are ready to composted!

Important to note--be sure you buy bungee cords that fit over the top of the trash can...you don't want you compost to spill out when you tumble it.
I tumble (read: kick around) mine every 3 days or so. I'll update you on when I have wonderful "black gold."


Here is the finished product before going outside (Yes, I did this project inside. It was raining so I just put down a sheet in the kitchen.)